移动物料信息分布式传输方法及应用

在流程工业生产中,移动物料计量信息的传输普遍采用电台和无线模块。接收电台周围环境严重影响计量信息的传输效果,尤其是钢结构厂房、电磁干扰区内,数据传输过程中的丢包率、误码率相当严重。本文提出一种多节点分布式传输方法,根据各个生产作业区环境条件设置相应的WIFI节点数,实现对作业区的无线信号覆盖。网络覆盖区内无线模块、PDA终端(PDA)、终端查询设备通过节点工作频段和阵列天线自适应调节,实现数据传输最佳化。铜熔炼生产现场测试表明,此种传输方法可以有效消除周围环境的电磁干扰,数据丢包率低于0.1%。     

纳米氧化锌/低密度聚乙烯膜中锌向食品的迁移研究

目的研究纳米氧化锌/低密度聚乙烯膜(low density polyethylene film,LDPE)中锌(Zn)向食品的迁移行为,探究其迁移规律。方法选取2种食品模拟物(3%乙酸及超纯水)及真实食品(食用白醋及瓶装水),在3种不同实验温度下(70、40及20℃),研究锌向食品模拟物的迁移规律。采用扫描电子显微镜(scanning electron microscope,SEM)和原子力显微镜(atomic force microscope,AFM)表征纳米ZnO/LDPE膜的表面形貌。结果锌向酸性模拟物中的迁移率远远大于水性模拟物中的迁移率,其中锌向酸性模拟物中的最大迁移率分别为22.7%,20.3%及18.6%(ZL-1,ZL-2及ZL-2#),向水性模拟物中的最大迁移率分别为9.9%,5.7%及4.9%(ZL-1,ZL-2及ZL-2#);锌向酸性食品的迁移量(1.59~5.03 mg/g)同样高于向水性食品的迁移量(2.98~24.60μg/g);随着纳米ZnO的初始含量变大迁移率变小;而偶联剂的加入对锌的迁移有一定的抑制作用。随着纳米ZnO浓度的增加,在薄膜中观察到纳米ZnO的不规则形貌。结论纳米ZnO/LDPE膜不适合在高温下包装食物,且其在酸性食品中的安全隐患高于水性食品。     

Electrochemical hydrogen storage performance of as-cast and as-spun RE-Mg-Ni-Co-Al-based alloys applied to Ni/MH battery

The La-Mg-Ni-Co-Al-based AB₂-type La_0.8–xCe_0.2Y_xMgNi_3.4Co_0.4Al_0.1 (x=0, 0.05, 0.1, 0.15, 0.2) alloys were prepared via melt spinning. The analyses of the X-ray diffraction (XRD) and scanning electron microscopy (SEM) proved that the experimental alloys contain the main phase LaMgNi₄ and the second phase LaNi₅. Increasing Y content and spinning rate lead to grain refinement and obvious change of the phase abundance without changing phase composition. Y substitution for La and melt spinning make the life-span of the alloys improved remarkably, which is attributed to the improvement of anti-oxidation, anti-pulverization and anti-corrosion abilities. In addition, the discharge capacity visibly decreases with increasing the Y content, while it firstly increases and then decreases with increasing spinning rate. The electrochemical kinetics increases to the optimum performance and then reduces with increasing spinning rate. Moreover, all the alloys achieve to the highest discharge capacities just at the initial cycle without activation.     

单一低渗透突出煤层水力冲孔工艺优化应用分析

为了有效提高单一低渗透突出煤层的瓦斯抽采效率，以高压水射流冲击理论为指导，针对平煤股份八矿己组突出煤层特征建立数值模型，模拟分析水力冲孔应力分布规律，通过现场实测分析冲孔有效影响范围，进一步优化设计冲孔参数、指导现场施工。现场应用表明，水力冲孔是一种行之有效的方法，对单一低渗透突出煤层实施水力冲孔卸压增透、提高瓦斯抽采效果具有重要意义。     

Influence analysis of bracket set on seismic performance of steel eave columns in Chinese traditional style buildings

This paper presents influence analysis of bracket set on seismic performance of steel eave columns in Chinese traditional style buildings. Eight 1/1.5‐scale steel eave columns were constructed and tested under low cyclic reversed loading, including 4 specimens with bracket set and 4 specimens without bracket set. Based on the analysis of the strain of the specimens, the failure modes of the specimens were obtained. In addition, the hysteresis loops, skeleton curves, degradations of stiffness and strength, ductility, and dissipation capacities of the specimens were analyzed. Bracket set changed the force transfer mechanisms and failure modes of the specimens and had a significant influence on the seismic performance of the specimens. Compared with the specimens without bracket set, the yielded and ultimate bearing capacities of the specimens with bracket set improved by 30.7% and 24.0%, respectively. And also, the stiffness of the specimens with bracket set at the yielded and ultimate points increased by 52.8% and 135.6%. The dissipation capacities of the specimens with bracket set were 2.12 times those of the specimens without bracket set at yielded load. However, the ductility of the specimens with bracket set slightly decreased by 8.5%. It was shown that the seismic performance of the specimens with bracket set was better than that of the specimens without bracket set. The work in this paper provides a basis for further theoretical study on the seismic performance of steel eave columns in Chinese traditional style buildings.     

三塘湖盆地中—下侏罗统煤层甲烷风化带划分

以三塘湖盆地中、低煤阶煤层含气量和主要气体成分为基础,结合盆地构造、沉积及水文地质特征,对汉水泉凹陷和条湖凹陷煤层甲烷风化带进行了划分,并对库木苏凹陷、马朗凹陷、淖毛湖凹陷和苏鲁克凹陷煤层甲烷风化带进行了预测。结果表明,三塘湖盆地甲烷风化带深度为400~1000 m.由于受东北冲断隆起带的影响,三塘湖盆地北部甲烷风化带浅于南部。沉积方面,盆地东部淖毛湖凹陷、马朗凹陷和条湖凹陷深湖—半深湖和辫状河三角洲成煤环境优于盆地西部汉水泉凹陷和库木苏凹陷扇三角洲成煤环境,盆地东部甲烷风化带普遍浅于西部;水文地质方面,条湖凹陷和马朗凹陷中开启性局部滞留水文地质单元形成的甲烷风化带浅于其他凹陷封闭性弱径流水文地质单元的甲烷风化带。初步预测马朗凹陷北部为下一步煤层气勘探开发的优势区块,条湖凹陷北部为下一步煤系气勘探开发的优势区块。     

In Silico Study on Tumor-Size-Dependent Thermal Profiles inside an Anthropomorphic Female Breast Phantom Subjected to Multi-Dipole Antenna Array

Electromagnetic hyperthermia as a potent adjuvant for conventional cancer therapies can be considered valuable in modern oncology, as its task is to thermally destroy cancer cells exposed to high-frequency electromagnetic fields. Hyperthermia treatment planning based on computer in silico simulations has the potential to improve the localized heating of breast tissues through the use of the phased-array dipole applicators. Herein, we intended to improve our understanding of temperature estimation in an anatomically accurate female breast phantom embedded with a tumor, particularly when it is exposed to an eight-element dipole antenna matrix surrounding the breast tissues. The Maxwell equations coupled with the modified Pennes’ bioheat equation was solved in the modelled breast tissues using the finite-difference time-domain (FDTD) engine. The microwave (MW) applicators around the object were modelled with shortened half-wavelength dipole antennas operating at the same 1 GHz frequency, but with different input power and phases for the dipole sources. The total input power of an eight-dipole antenna matrix was set at 8 W so that the temperature in the breast tumor did not exceed 42 °C. Finding the optimal setting for each dipole antenna from the matrix was our primary objective. Such a procedure should form the basis of any successful hyperthermia treatment planning. We applied the algorithm of multi for multi-objective optimization for the power and phases for the dipole sources in terms of maximizing the specific absorption rate (SAR) parameter inside the breast tumor while minimizing this parameter in the healthy tissues. Electro-thermal simulations were performed for tumors of different radii to confirm the reliable operation of the given optimization procedure. In the next step, thermal profiles for tumors of various sizes were calculated for the optimal parameters of dipole sources. The computed results showed that larger tumors heated better than smaller tumors; however, the procedure worked well regardless of the tumor size. This verifies the effectiveness of the applied optimization method, regardless of the various stages of breast tumor development.     

阶梯溢流坝面坡度对一体化消能工水力特性的影响

为探求高水头、大单宽流量下坝面坡度对一体化消能工水力特性的影响,以阿海水电站为原型,采用三维k-ε双方程紊流模型,引入水气两相流VOF计算方法,利用几何重建格式来迭代生成自由水面,对1∶0.80、1∶0.75、1∶0.65三种阶梯面坡比进行数值模拟研究。结果表明:①最大负压值均位于首级阶梯立面凸角下1/4附近,并随坡度增加而增大。坡度为56.98°时,最大负压值为61.02 kPa,超过了6×9.81 kPa。②水流空化数在宽尾墩水舌出口位置出现最小值,空化数随坡度变陡而减小。坡度为56.98°时,空化数最小为0.358。坡度为51.34°时,空化数最大,为0.381。③随着阶梯溢流坝坝面坡度变缓,消力池最大临底流速增大。当坡度为51.34°时,消力池最大临底流速最大,达到26.84 m/s,超过了25 m/s,易发生冲磨破坏。当坡度为56.98°时,消力池最大临底流速最小,为24.00 m/s。消力池尾坎前最大临底流速随坡度增加而减小,坡度为56.98°时最小,为9.63 m/s;坡度为51.34°时,消力池尾坎前最大临底流速最大,为9.96 m/s。④坡度的变化对一体化消能工消能率的影响不大,坡度从51.34°增加到56.98°,消能率只提升0.15%。     

Heat Transfer Analysis of MHD Power Law Nano Fluid Flow through Annular Sector Duct

Flow and heat transfer analysis of an electrically conducting MHD power law nano fluid is carried out through annular sector duct,under the influence of constant pressure gradient.Two types of nano particles(i.e.Cu and TiO2)are used in power law nano fluid.Strongly implicit procedure,(SIP)is used to simulate the discretized coupled algebraic equations.It has been observed that volume fraction of nano particles,ϕand magnetic field parameter,Ha are favourable for the heat transfer rate,however,both resist the fluid flow.Impact of applied uniform transverse magnetic field exceeds in the case of shear thickening fluids(i.e.n>1)by increasing the value of Ha as compared to that in shear thinning fluids(i.e.n<1).Therefore,enhancement in heat transfer rate is comparably more in shear thickening fluid.Furthermore,comparable limiting case study with published result is also carried out in this research paper.     

低温贮藏对“翠香”猕猴桃冷害和品质的影响

研究以"翠香"猕猴桃为试材,比较两种温度(0±0.5℃和2±0.5℃)下,贮藏果实的冷害发生情况及品质差异,同时关注果实贮藏期间果实苦味的产生,以期找出果实苦味产生的原因。结果表明,0±0.5℃贮藏时,果实硬度保持较好,果实呼吸强度下降,有冷害和褐变发生,并伴有果实发苦现象;而2±0.5℃贮藏的果实未见冷害和褐变发生,色度得以保持,多酚氧化酶(PPO)和过氧化物酶(POD)活性下降,极显著延缓了细胞膜透性的升高,此外,果实可溶性固形物和维生素C的含量也显著提高,果实没有出现苦味。试验中发现"翠香"猕猴桃苦味现象和冷害伴随产生,并随着冷害发展加重,推测"翠香"果实的苦味可能是由冷害造成的。